I am using the Single Slit example to model grain size distribution as a function of velocity/pressure, because the acoustic wave behaves similarly to water in a delta system.
The output for the Single Slit example is a structure. I'm hoping to feed this output into a loop, but need to get the information in a usable form because as far as I know, for loops only run with arrays/ cells.
I'm still not very experienced in Matlab and any help is appreciated.
Thank You,
Pauline
Hi Pauline,
I haven't quite understood your specific problem. Do you need to understand structures or do you have a k-Wave specific query? There is lots of Matlab help on the Mathworks site and elsewhere on the web about structures. Try here perhaps: http://www.mathworks.com/help/matlab/structures.html
Regards,
Ben
Ben,
The single slit example shows a movie, but it doesn't look like it gives me a full time series for velocity and pressure. I think I need this information to write a loop for the project I'm trying to complete.
Thank you,
Pauline
Hi Pauline,
You can get out the pressure and particle velocity time series. You need to define the positions of the sensors in sensor.mask' and choose the outputs insensor.record`. Have a look at the help text for the function kspaceFirstOrder2D (or 3D).
I hope that's what you need.
Ben
You must log in to post.